7
Remove the
display
panel.
Steps
1
Peel the adhesive tape that covers the camera cable connector [1].
2
Disconnect the camera cable from the camera module and unroute the cable [2, 3].
3
Peel the adhesive tape that secures the display cable and lift the display cable away from the display back cover and antenna
assembly.
Installing display cable
Steps
1
Affix the adhesive tape to secure the display cable to the display back coverand route the cable [1].
2
Connect the camera cable connector to the camera module [2].
3
Affix the adhesive tape to secure the camera cable connector [3].
Removing and Installing
73