Expansion Cards; Pcie Slot Priority - Dell VxRail G560 Owner's Manual

• Up to two RDIMMs can be populated per channel.
• Up to two LRDIMMs can be populated per channel.
• If memory modules with different speeds are installed, they will operate at the speed of the slowest installed memory module(s) or
slower depending on appliance DIMM configuration.
• Populate memory module sockets only if a processor is installed. For single-processor appliance, sockets A1 to A12 are available. For
dual-processor appliance, sockets A1 to A12 and sockets B1 to B12 are available.
• Populate all the sockets with white release tabs first, and then followed by the black release tabs.
• In a dual-processor configuration, the memory configuration for each processor should be identical. For example, if you populate socket
A1 for processor 1, then populate socket B1 for processor 2, and so on.

Expansion cards

PCIe slot priority

Table 27. Supported expansion options
Riser
PCIe Slot (slot 4)
Mezzanine slot (slot 1)
Open Computing Project
(OCP) mezzanine slot
(slot 3)
Riser slot (SATA M.2)
(slot 5)
NOTE: For the expansion bus specification see
Table 28. Supported expansion cards
Location Card type
OCP (slot 3) Intel CNA X710 -
Dual Port Adapter
Mezzanine (slot 1) Dell HBA H330 mini
Adapter
Slot 5 SATA M.2
Slot 4 Intel Ethernet CNA
XL710-Q2 Adapter
Slot 4 Intel Ethernet 10G
Dual Port X550-t
Adapter
Form factor Slot
Low profile 4
Mezzanine 1
Mezzanine 3
Low profile 5
Expansion bus
Form factor
Mezzanine
Mezzanine
Low profile
Low profile
Low profile
CPU mapping
CPU1
CPU1
CPU1
CPU2
specifications.
Link width
x8
x8
x16
x8
x4
Slot width Maximum power
consumption
PCIe Gen3 x16 (x16 75 W
connector)
PCIe Gen3 x8 (through 25 W
Bridge Board)
PCIe Gen3 x16 25 W
PCIe connector data
25 W
lanes not used for M.2
SATA Riser
Slot priority Maximum number of
cards
3 1
1 1
4 1
4 1
4 1
Replacing and adding hardware 31