Advertisement
C H AN G I N G YO U R S TR AP
S TA N DA R D S P R I N G B A R / FO R K TO O L
1.
Lay your watch face down on a soft cloth.
2.
Insert forked end of tool between the edge of the strap
and the lug.
3.
Engage spring bar end and push/pull back on it to
release from the lug.
4.
Remove spring bar from end of strap, place in your new
Shinola strap.
5.
Using your hands, insert one end into the hole on the
inside of the lug.
6.
Use forked end of tool to hold back spring bar end while
sliding the strap into position.
7.
Release spring bar with tool and make sure the end
inserts into the hole.
8
Advertisement
