Advertisement
C H AN G I N G YO U R B R AC E LE T
P LI E R TO O L
1. Lay your watch face down on a soft cloth.
2. Adjust Screw A so that the distance between the two forks is equal to
the length of the spring bar.
3. Insert forks into the cutouts of the bracelet where the spring bar is
exposed, pinch to engage and compress spring bar end and remove the
bracelet from the lug.
4. Once the bracelet has been removed, use the other watch strap tool to
punch the spring bars out of the bracelet then insert spring bars into
your new strap.
5. Using your hands, place one end of the spring bar on the new Shinola
strap into the lug and use the other fork tool to hold back the spring
bar while sliding it into position. Make sure the strap with the buckle
attached is on the 12 o'clock side of watch. Repeat this step on the
6 o'clock side.
6
Advertisement
