Pio Control Register - Imi Tech Mx-xxxxG Series User's Operation Manual

Page 70
5.9.

PIO Control Register

The Programmed Input / Output provides a set of I/O ports which can be configured by the defined address. The
PIO control register address, for strobe and trigger signal, is as follows.
Address
0xF2F21000
0xF2F21004
0xF2F21008
Description (bit 0: msb)
PIO output register
Bit 30: Strobe GPIO output
PIO input register
Bit 31: Trigger GPIO input
PIO GPIO enable register.
Bit 30: Strobe pin GPIO selector (1: GPIO, 0: strobe)
AMAZON SERIES Operation Manual
P i o n e e r i n D i g i t a l V i s i o n T e c h n o l o g y
Read/Write
Write only
Read only
Read/Write