auna 10031202, 10031203 Manual page 24

Recall radio preset memory
• There are 32 preset for radio station.
• When the radio is ON,
• Press <Preset +>, <Preset -> to select the desired preset memory station.
• When new preset memory key is pressed, MUTE is active. When keying the preset memory has been
released for 1 second, the selection of preset memory is considered as valid and the radio will be
tuned to that frequency immediately with MUTE idle.
Store into memory
• To store the tuning frequency of radio station being received into any of the preset memory, press
<MEM> once. The ‚MEM' goes flashing.
• Select the desired memory station and page by pressing the corresponding key until its number goes
solid above ‚MEM'.
• Press <Preset +>, <Preset -> to select the desired preset memory station.
• Press <MEM> again to confirm the process of storing. Then, ‚MEM' goes solid.
• Press other key to start its corresponding function.
Search Up/Down
• When the radio is ON, press <UP> once to change the receiving frequency up by 1 step.
• Press <DOWN> once to change the receiving frequency down by 1 step.
• Press and hold <UP> to search the next radio station by moving the receiving frequency up.
• Press and hold <DOWN> to search the next radio station by moving the receiving frequency down.
AMS Using
• When radio is on.
• Press and hold < MEM Scan> for 3 seconds to active AMS mode.
• In this mode, the radio will automatically scan the radio station and store the station that had been
scanned until scan up all the frequency or stored all the memory station, it will exit automatically.
Note: When AMS function active, the stored memories will replace by the new scanned radio station!
24
www.auna.de