Operating The System Through The Keyboard; Optional Components; Hooking Up The Optional A/V Components - Sony MG110 Operating Instructions Manual

Labeling titles through the keyboard
(continued)
Editing operations while labeling
To
Cancel the operation
Move the cursor
Erase the character at the
cursor position
Erase the character
preceding the cursor
Operating the system
through the keyboard
You can operate the system without using the
buttons and controls on the unit or on the
remote.
As the keyboard substitutes
for the following functions
CD PLAY
CD PAUSE
CD STOP
DISC ACCESS (DISCt)
TUNER/BAND
– .
> +
DISPLAY
28
Press
[Esc]
[T] or [t]
[Delete]
[Back Space]
Press
[F5]
[F6]
[F7]
[F8]
[F9]
[F10]
[F11]
[F12]

Optional Components

Hooking up the optional
A/V components
You can connect a digital or an analog
component to this system.
To the audio output jacks of an MD deck,
a VCR, etc.
To the digital input jack of a digital component
To Do this
Make a digital Connect an optical cable.
recording from CD
to MD
Listen to the analog Connect the audio cords.
sound of a Press 5.1CH/VIDEO (MD)*
connected VCR repeatedly until "VIDEO"
appears.
Listen to the analog With the system turned off,
sound of the press 5.1CH/VIDEO (MD)*
connected MD deck while holding down ENTER.
This switches the "VIDEO"
function to "MD". Once you
enable the "MD" function,
just press 5.1CH/VIDEO
(MD)*.
Then connect the audio cords.
Press 5.1CH/VIDEO (MD)*
repeatedly until "MD"
appears.
Connect the audio cords.
Make an analog
recording from MD Press 5.1CH/VIDEO (MD)*
onto a tape repeatedly until "MD"
appears.
* VIDEO (MD) for MHC-MG110 or on the remote