Setting The Time - Sony MG110 Operating Instructions Manual

Adjusting the speaker volume
of each speaker
— Test tone
1
Press PRO LOGIC.
"DOLBY PL ON" appears.
2
Press TEST TONE on the remote.
The test tone is heard from the speakers in
the following order.
Front (left) t Center t Front (right) t
Rear t Front (left) t ...
3
From your listening position, press
CENTER (+/–) and REAR (+/–) on the
remote to adjust the volume until the
each volume level becomes the same.
4
Press TEST TONE when you finish
adjusting.
The test tone turns off.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.

Setting the time

1
Turn on the system.
2
Press TIMER SET.
When you set the clock for the first time, go
to step 5.
3
Press – . or > + repeatedly to
select "CLOCK SET".
4
Press ENTER.
5
Press – . or > + repeatedly to set
the hour.
6
Press ENTER.
7
Press – . or > + repeatedly to set
the minute.
8
Press ENTER.
Tip
If you made a mistake or want to change the time,
start over from step 1.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
11