Front Panel - 3rd Power KITCHEN SINK User Manual

Front Panel:

1 2 3 4 5
Preparing to Operate your Kitchen Sink™
Make certain that all connections are made prior to operating your Citizen Gain Amplifier including
power cable, speaker connection, instrument cable and instrument connection. Make certain that all
tubes are installed.
Power Switch (1)
The POWER switch, when placed in the DOWN position, provides AC wall power to the amplifier.
Standby Switch (2)
The STANDBY switch, when placed in the UP position, puts the amplifier in 'standby mode' allowing
the tubes to warm up. When this switch is place in the DOWN position, the tube circuitry is fully
functional and ready to amplify your guitar signal.
HybridMASTER™ Control (3)
The MAIN control is always active and sets the absolute volume ceiling. The foot-switchable HM
bypass control will be covered later in the manual. HybridMASTER is a patented by 3rd Power.
Presence Control (4)
The global PRESENCE control affects both channels and allows you to adjust the character or
'forwardness' of your sound. Low settings create 'darker' tones, whereas higher settings create a
'brilliant' or crisp sound.
Reverb Control (5)
The REVERB control is used to add/blend in the perfect amount of ambience to your sound. The
reverb effect in this amplifier features pure Class A vacuum tube drive and recovery circuitry to
deliver an authentic, vintage sounding spring reverb effect.
4