Front Panel; Power Switch; Standby Switch - 3rd Power WOOLY COATS EXTRA SPANKY User Manual

Front Panel:

2 1
Preparing to Operate your Wooly Coats™ Extra Spanky Amplifier
Make certain that all connections are made prior to operating your Amplifier including power cable,
speaker connection, instrument cable and instrument connection. Make certain that all tubes are
installed.

Power Switch (1)

The POWER switch, when placed in the UP position, provides AC wall power to the amplifier.

Standby Switch (2)

The STANDBY switch, when placed in the DOWN position, puts the amplifier in 'standby mode' al-
lowing the tubes to warm up. When this switch is place in the UP position, the tube circuitry is fully
functional and ready to amplify your guitar signal.
5