Channel Select - 3rd Power KITCHEN SINK User Manual

Optional Remote Foot-switch:
1
The optional remote foot-switch allows you to put the KITCHEN SINK's advanced features under
foot control. The unit includes an attached 18' cable that fans out to three separate 1/4" plugs, each
marked "I", "II" or "III" and connects to matching 1/4" input jack on the back panel of the amplifier.
The unit requires external 9V DC (Boss type) power supply to drive the LEDs.

Channel Select (1)

To prepare your KITCHEN SINK for channel switching operation, select channel 2 via the mini toggle
switch on the front panel of the amp (a red LED will light up). Now connect the 1/4" plug labeled "I"
to the back of the amplifier in the jack labeled "I" and "CHANNEL". You may now remotely control
your channel change function.
+GAIN (ch. 2 only) (2)
Select the +GAIN mini toggle switch in the on position (a red LED will light up on the front of the
amp). Now connect the 1/4" plug labeled "II" to the back of the amplifier in the jack labeled "II" and
"GAIN BOOST". You may now remotely control your channel extra gain function.
HybridMASTER Bypass (Boost) (3)
Connect the 1/4" plug labeled "III" to the back of the amplifier in the jack labeled "III" and "LEAD
BOOST". You may now remotely control your channel extra gain function.
OPERATION NOTES:
• The KITCHEN SINK is a 40W amplifier. The design concept is this: bring HybridMASTER (HM)
down to a suitable rhythm volume (around 25W is ideal (you'll find this around 10:30 - 11 o' c lock
on the dial) and turn the HM Bypass knob all the way up. The amp will now toggle between
~25W and ~40W - perfect for live performances. For TV performances, bring HM down to around
8 o' c lock and HM Bypass to 10 o' c lock. The amp will now toggle between `7W and ~15W.
2 3
13