Operation; Basic Function Description - Haier AU082FYCRA(HW) Service Manual

Note:
1. Setting range:
1) Tank mode: 25°C~75°C (the default is 42°C).
2) Cooling mode of air conditioning: water temperature 5°C~20°C (the default is 9°C).
3) Heating mode of air conditioning: water temperature 25°C~55°C (the default is 40°C).Setting accuracy is 0.5°C.
2. Outlet water temperature display range: 0°C~100°C,display accuracy is 0.1°C.
3. The controller has two kinds of main display interface, standard version and simple version. The simple version
has no timer, week, clock.If you want to change the interface,you need to change the DIP switch(SW1-6) of the
wired controller,and it willbe effective after the system is powered again.

19.3 Operation

(1)Basic function description

Basic function
Method of operation
description
ON/OFF Press the key
In the state of on, press the key
Mode control
Whether there is "tank" mode or not depends on the indoor unit setting.
Adjusting setting
In the state of on,press the key
temperature
(2)Special function index
Function Method of operation
Forced
to start
In the state of off, long press the key
pump (for
debugging)
Set backlight In the state of off, press the key
time the value by pressing the key
Press the key
Timer mode
key or
Time setting Press the key
Function
Set parameter of timer
Check parameters and
change functions (for
debugging)
Set and cancel child lock Press the key
ECO(default)
/QUIET/TURBO
to switch on/off the wired controller.
and
or
for 5 seconds to enter the timer ON/OFF setting, choose ON/OFF by pressing the
and press the to confirm.
for 10 seconds to enter into time setting function.
Method of operation
In the state of ON, long press the key
When the backlight is on, press the key
and
In the state of on, press the key
confirm by pressing the key
to change mode.
or to adjust the setting temperature.
for 15 seconds.
for 5 seconds, 00 (stable lighting) /15S/30S/60S. Adjust
and confirm by pressing the key
and for 5 seconds to enter.
and for 5 seconds to enter.
for 10 seconds to set or cancel.
to enter, switch by pressing the key
again.
64
.
or , and