Table of Contents
Advertisement
Preparing for installation
Moving the outdoor unit
f Select the moving path in advance .
f
f Be sure that moving path can support weight of the outdoor unit .
f
f Do not slant the product more than 30˚ when carrying it . (Do not lay the product down in sideways . )
f
f Surface of the heat exchanger is sharp . Be careful not to get injured while moving the product .
f
• You must use certain part of the product when moving the product .
CAUTION
When moving with a crane
f Fasten the wire rope as shown in the figure .
f
f To protect damage or scratches, insert a piece of cloth between the
f
outdoor unit and the wire rope .
When moving with a forklift
f Carefully insert the forklift forks into the forklift holes at the bottom of
f
the outdoor unit .
f Be careful with the forklift from damaging the product .
f
When moving the product without wooden pallet and the crane is not available for use
f Connect a wire rope to the outdoor unit as you would move it with a
f
crane .
f Hang the wire rope to the forklift fork to move the outdoor unit .
f
Spreader bar
ENGLISH-10
Forklift
Forklift
Wire rope
Spreader
bar
Wire rope
Protection
cloth
Wooden
pallet
Hide quick links:
Advertisement
Table of Contents
