Mechanical Characteristics; Component Envelope; Table 7. Mechanical Characteristics - Planar ICEBrite EL480.240-PR2 User Manual

Mechanical Characteristics

Component Envelope

For ordering information of el480-240-pr2 and other EL Displays, please visit http://www.eldisplays.com/el480-240-pr2/ or call +1-888-394-4998.

Table 7. Mechanical Characteristics.

Display External Dimensions
millimeters (inches)
Weight (typical)
Fill Factor
Display Active Area
millimeters (inches)
Pixel Size
Pixel Pitch
The component envelope shown in Figure 4 illustrates the distance
components extend behind the display. Tall components do not necessarily fill
this area. Planar reserves the right to relocate components
constraints of the component envelope without prior customer notification.
For this reason, Planar advises users to design enclosure components to be
outside the component envelope.
An air gap of at least 5 mm is recommended to dissipate heat from display
components. Device designers will need to consider their specific system
requirements to determine the necessary spacing.
width 189.4 (6.91) nominal
height 108.0 (4.14) nominal
depth 21.5 (0.85) nominal
310 g (10.9 oz), nominal
50.2%
width 146.31 (5.76) nominal
height 73.11 (2.88) nominal
width 0.22 (0.0085) nominal
height 0.22 (0.0085) nominal
horizontal .31 (0.012) nominal
vertical .31 (0.012) nominal
EL480.240-PR2 Operations Manual (020-0347-00A)
within
the
11