Installation And Handling; Mounting El Displays - Planar ICEBrite EL480.240-PR2 User Manual

Small graphics display
Hide thumbs Also See for ICEBrite EL480.240-PR2:
Table of Contents

Advertisement

Installation and Handling

Mounting EL Displays

For ordering information of el480-240-pr2 and other EL Displays, please visit http://www.eldisplays.com/el480-240-pr2/ or call +1-888-394-4998.
Do not drop, bend, or flex the display. Do not allow objects to strike the
surface of the display.
CAUTION: The display uses CMOS and power MOS-FET devices. These
components are electrostatic sensitive. Unpack, assemble, and examine this
assembly in a static-controlled area only. When shipping, use packing
materials designed for protection of electrostatic-sensitive components.
CAUTION: To prevent injury in the event of glass breakage, the use of an
impact resistant shield or a protective overlay should be used on the viewer
side of the display.
Properly mounted, EL displays can withstand high shock loads as well as
severe vibration found in demanding applications. However the glass panel
used in an EL display will break if subjected to bending stresses, high impact,
or excessive loads.
Stresses are often introduced when a display is mounted into a product.
Ideally, the mounting tabs of the display should be the only point of contact
with the system. Use a spacer or boss for support; failure to do so will bend the
display and cause the glass to break. The instrument enclosure or frame should
not flex or distort in such a way that during use the bending loads might be
transferred to the display. Mounting surfaces should be flat to within ±0.6 mm
(±0.25"). Use all the mounting holes provided. Failure to do so will impair the
shock and vibration resistance of the final installation.
The EL480.240-PR2 is a tab mounted display. Use appropriate length standoffs
to assure that screws through the mounting tabs do not introduce bending
stresses into the display. Do not deflect the ECB out of its normal plane. The
EL480.240-PR2 mounting tabs were designed for a 3 mm screw.
WARNING: These products generate voltages capable of causing personal
injury (high voltage up to 230V
during operation.
). Do not touch the display electronics
ac
EL480.240-PR2 Operations Manual (020-0347-00A)
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icebrite el480.240-pr2 cc

Table of Contents