Panasonic DMR-UBS80EG Service Manual page 47

Mode name
Switch the TV system Switch the TV system to another one.
Deep Colour initialization The Deep Colour setting is initialized.
Set 4k/60p output to Set 4k/60p output to "OFF", and set the
"OFF" output to HDMI (ver. 1.4) equivalent.
Item
Description
FL display
1.
2.
1.
2.
1.
2.
47
Key operation
Front Key
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "05 P/N" is displayed on
the unit's display.
3. Press [OK] on the remote control.
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "07 DC" is displayed on the
unit's display.
3. Press [OK] on the remote control.
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "13 L4K" is displayed on
the unit's display.
3. Press [OK] on the remote control.