Table of Contents
Advertisement
KX-MB771GR
12.5.2. When the recording paper is not fed into the unit properly
The display will show the following.
1.
Pull the paper input tray until it clicks into place, then put it com-
pletely out, lifting the front part of the tray. Remove the recording
paper and straighten.
2.
Re-load the recording paper.
3.
Insert the paper input tray to the unit, lifting the front part of the tray.
Then push it completely into the unit.
Note:
• If the error message is still displayed, check the recording paper specifications and re-install recording paper.
184
Advertisement
Table of Contents
Troubleshooting
