Sony DVP-NS318 Operating Instructions Manual page 15

6
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 28)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 28)
7
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
8
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
◆ Video signals
• VIDEO (page 28)
◆ RGB signals
• RGB (page 28)
9
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
10
Press X/x to select the type of
jack (if any) you are using to
connect to an audio component,
then press ENTER.
Select "NO," if you do not connect an
audio component, then go to step 14.
16:9
ON
JACKET PICTURE
VIDEO
VIDEO
RGB
Select "YES: LINE OUTPUT L/R
(AUDIO)," if you connect an audio
component using an audio cord, then go
to step 14.
Select "YES: DIGITAL OUTPUT," if
you connect an audio component using a
digital coaxial cord.
11
Press X/x to select the type of
Dolby Digital signal to your audio
component.
If your audio component has a Dolby
Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
12
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
13
Press X/x to select whether or
not to send a DTS signal to your
audio component.
If your audio component has a DTS
decoder, select "ON." Otherwise, select
"OFF."
14
Press ENTER.
Quick Setup is finished and connections
are complete.
If your audio component has an MPEG
audio decoder, set "MPEG" to "MPEG"
(page 31).
STANDARD
DOLBY SURROUND
ON
DOLBY DIGITAL
DOLBY DIGITAL
D-PCM
48kHz/16bit
STANDARD
DOLBY SURROUND
ON
DOLBY DIGITAL
PCM
OFF
OFF
ON
15