Controlling TVs with the remote
You can control the sound level, input source,
and power switch of your Sony TV with the
Depending on the connected unit, you may
not be able to control your TV using all or
some of the buttons on the supplied remote.
To control other TVs with the remote
You can control the volume, input source, and
power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
While holding down TV [/1, press the
number buttons to select your TV's
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Turn the TV on or off
Adjust the volume of the
Switch the TV's input
source between the TV and
other input sources
06, 08, 72
Step 5: Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
To skip an adjustment, press >. To return
to the previous adjustment, press ..
Turn on the TV then press [/1.
Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
"Press [ENTER] to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Menu to run Quick Setup (page 19).
Press ENTER without inserting a
The Language Setup Display appears.
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
The Screen Setup Display appears.
4:3 LETTER BOX
4:3 PAN SCAN