Hookups And Settings; Step 1: Connecting To Your Tv - Sony DVP-NS318 Operating Instructions Manual

Hookups and Settings

When unpacking, check the supplied accessories by referring to page 36.
b
• Plug cords securely to prevent unwanted noise.
• Refer to the operating instructions supplied with the components to be connected.
• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Connecting to Your TV

Connect this player to your TV using an audio/video (SCART) cord. This connection will use
your TV speakers for sound.
l : Signal flow
SCART input jack
Be sure to make the connections firmly to
avoid hum and noise.
When using this connection, check that the
TV conforms to RGB signals. Refer to the
operating instructions supplied with the TV to
be connected. Also, when you set "LINE" to
"RGB" under "SCREEN SETUP" in the
Setup Display (page 28), use a SCART cord
that conforms to each signal.
10
INPUT
SCART cord
(not supplied)
to LINE (RGB)-TV
CD/DVD player
When connecting to a standard 4:3 screen
TV
Some images may not fit your TV screen. To
change the picture size, see page 28.
b
• Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the
TV screen.
• When you connect the player to your TV via the
SCART jack, the TV's input source is set to the
TV