Table of Contents
Advertisement
55
i. Back off both head hinge set screws
until head hinge hole is clear.
2.
Tilt head hinge tongues up and back
as far as they will go.
3. Carefull y slip head onto head hinges
-
-
making sure tongues are inserted
as far
they can go into head
i-nge iois.
4. Allow the head to rest in its tilted-
back position .
5. Tighten both set screws securely
with screw driver.
6. Plug eIectrica leads into sockets
located inside cabinet. Cord identi
ed with "motor" tag must be plugged
irto scit marked "motor'
Untagge d
cord
goes
to
"light"
socket.
See Fig. 99
Advertisement
Table of Contents
