Multi Jog - Aiwa CX-ZR774 Operating Instructions Manual

MANUALLY
M1-M3
The (equalization curve can be customized to suit your preference.
1
2
3
4
Press GEQ FREQ (LOW).
The lowest level frequency indicator flashes for 8 seconds.
Within 8 seconds, turn MULTI JOG to adjust the
level of the lowest frequency.
Press GEQ FREQ (HIGH).
The highest level frequency indicator flashes for 8 seconds.
Within 8 seconds, turn MULTI JOG to adjust the
level of the highest frequency.
Up to 3 customized equalization curves can be stored on the
MANUAL mode M1-M3.
1
2
3
. *.=,
Set a new equalization
curve with
GEQ FREQ
and ?[!f
MULTI JOG.
See "SETTING A NEW EQUALIZATION CURVE
MANUALLY.
The created equalization curve is displayed for 8 seconds.
Within 8 seconds, press ENTER.
"MEMORY is displayed and all the manual mode indicators
flash for 8 seconds. Go to step 3 within those 8 seconds.
If this step is not completed within 8 seconds, press
GEQ
FREQ
first to display "GEQ ON". Then press ENTER within
8 seconds.
While the manual mode indicators are flashing,
press one of the graphic equalizer preset buttons
M1-M3.
The equalization curve is stored.
To select the stored equalization curve
1
Press
GEQ PRGM/MANU
to select the MANUAL mode.
The MANUAL indicator turns on.
2 Press one of the graphic equalizer preset buttons MI–M3.
The frequency level indicators between the lowest and the
highest are adjusted accordingly.
ENGLISH 9