EKX Full-Range Loudspeaker Accessories
Warning!
!
Never suspend EKX loudspeaker in a vertical column array.
Disregarding this warning could result in serious injury or death.
Notice!
If the eyebolts are removed reinstall the screws.
If the screws are not reinstalled air leaks occur in the enclosure, resulting in undesirable
performance.
1.1
Safety point
As an added safety measure, it is suggested the user install an extra suspension point back to
the building structural supports. This redundant safety point should have as little slack as
possible (less than one (1) inch is preferable).
To add a safety point, do the following:
1.
2.
3.
2015.03 | 01 | F.01U.308.107
Remove one (1) of the screws from the top of the loudspeaker.
Replace the screw with one (1) eyebolt and one (1) washer.
Tether the safety point back to the building structural supports.
An added safety point is established back to the structural supports.
Installation Note
Electro-Voice