Advertisement
EKX Full-Range Loudspeaker Accessories
2.2
Truss adapter
The truss adapter is used to suspend an EKX-12, EKX-15, EKX-12P, or EKX-15P full-range
loudspeaker on 1.5-inch to 2-inch truss tubing.
The truss adaptor kits contain the following:
Quantity:
Description:
1
EKX Full-Range Loudspeaker Accessories Installation Note (F.01U.308.107)
1
HEX L-KEY, 6MM, Long Arm
3
M10 Split Lock Washers
3
M10 Button Head Screws
1
Truss Clamp (with bolt and washer attached)
1
Bracket
1
M10 Fender Washer
1
M10 Forged Steel Shoulder Eyebolt
Table 2.2: Truss adapter kit components
Vertical adjustment of the truss clamp
The vertical adjustment allows the loudspeaker to be suspended at a natural down angle to
achieve the desired coverage. If the down angle required is in between the vertical adjustment
locations, use the smaller vertical adjustment location and a pull-back eyebolt. For more
information, see Suspending the truss adapter, page 15.
Figure 2.8: Vertical adjustment
Vertical
Adjustment
1
2
Table 2.3: Approximate natural down angle reference
2015.03 | 01 | F.01U.308.107
EKX-12
EKX-15
-1.5°
-34.5° down
-29.5° down
EKX-12P
2.0°
-1.5°
-34.5° down
Installation Note
EKX-15P
2.0°
-29.5° down
Electro-Voice
Advertisement
