Opening The Computer; Mounting The Drive; Connecting The Drive - Sony CRX-160S User Manual

Opening the Computer

Refer to your computers user manual for instructions on how to
open the computer.

Mounting the Drive

Do not mount the drive at an angle, it is only designed to be
operated horizontally or vertically.
Some computers chasis require mounting rails on each side of the
drive when installing new drives. If your system requires these rails
you should contact your computer supplier.
12
Installing the Drive Unit into the Computer

Connecting the Drive

The drive should be connected to the computer with the following
connectors:
• DC INPUT connector.
• AUDIO OUT connector (if you plan to connect audio equipment).
• SCSI INTERFACE connector.
DC INPUT connector
The pin assignment for the DC connector is as follows.
+5 V DC
After matching the beveled edges, insert the plug of the power
supply cable to the DC INPUT connector on the rear of the drive
and push it firmly in place.
Power supply cable
(4-pin connection cable)
Installing the Drive Unit into the Computer
50 Pin SCSI INTERFACE
Connector
DC INPUT connector
AUDIO OUT
connector
GND
+12 V DC
DC INPUT connector
13