The Cd Player Using The Display; Locating A Specific Track - Sony CFD-E75 Marketing Operating Instructions Manual

The CD Player
Using the display
You can check information about the CD
using the display.
Checking the total track
number and playing time
Press DSPL•ENT MEM in stop mode.
Total playing
time
Total track
number
Checking the remaining time
Press DSPL•ENT MEM while playing a CD.
To display
the current track number
and remaining time
on the current track*
the number of tracks left
and remaining time on the CD
the current track number
and playing time
* For a track whose number is more than 20, the
remaining time appears as "– –:– –".
12
DSPL
ENT MEM
Press DSPL•
ENT MEM
once
twice
three times
Locating a specific
track
You can quickly locate any track on a CD
using the number buttons on the remote.
You can also find a specific point in
a track while playing a CD.
POWER
STANDBY SLEEP
CD/RADIO
(AC ONLY)
MODE 0/10 10
VOL
BAND TUNE
FUNCTION TUNE
To locate
a specific track directly
a point while listening to > (forward) or .
the sound
a point while observing
the display
Note
You cannot locate a specific track if "SHUF" or
"PGM" is lit in the display. Turn off the indication
by pressing x.
Tip
When you locate a track numbered over 10, press
>10 first, then the corresponding number buttons.
Example:To play track number 23, press >10 first,
then 2 and 3.
Number
buttons
., >
Press
the number button of
the track.
(backward) while
playing and hold down
until you find the point.
(On the player, use M
or m).
> (forward) or .
(backward) in pause
and hold down until
you find the point.
(On the player, use M
or m).