The Cd Player Using The Display; Locating A Specific Track - Sony CFD-G70 Operating Instructions Manual

The CD Player
Using the display
You can check information about the CD
using the display.
DISPLAY ENT
MEMORY
Checking the total track
number and playing time
Press DISPLAY ENT•MEMORY in stop
mode.
Total playing
time
Total track
number
Checking the remaining time
Press DISPLAY ENT•MEMORY while
playing a CD.
To display
the current track number
and remaining time
on the current track*
the number of tracks left
and remaining time on the CD
the current track number
and playing time
* For a track whose number is more than 20, the
remaining time appears as "– –:– –".
12
Locating a specific
track
You can quickly locate any track on a CD
using the number buttons on the remote.
You can also find a specific point in
a track while playing a CD.
To locate
a specific track directly
a point while listening to > (forward) or .
the sound
a point while observing
the display
Press
Note
DISPLAY ENT•
MEMORY
You cannot locate a specific track if "SHUF" or
"PGM" is lit in the display. Turn off the indication
once
by pressing x.
Tip
twice
When you locate a track numbered over 10, press
three times >10 first, then the corresponding number buttons.
Example: To play track number 23, press >10
first, then 2 and 3.
Number
buttons
., >
Press
the number button of
the track.
(backward) while
playing and hold down
until you find the point.
> (forward) or .
(backward) in pause
and hold down until
you find the point.