The Cd Player Using The Display; Locating A Specific Track - Sony CFD-CD777S MK2 Operating Instructions Manual

The CD Player
Using the display
You can check information about the CD
using the display.
Checking the total track
number and playing time
Press DISPLAY (DISPLAY/ENTER on the
player) in stop mode.
Total playing
time
Total track
number
Checking the remaining time
Press DISPLAY (DISPLAY/ENTER on the
player) while playing a CD. The display
changes as follows:
tthe current track number and playing
time
r
the current track number and the
remaining time on the current track*
r
the number of tracks left and remaining
time on the CD
* For a track whose number is more than 20, the
remaining time appears as "– –:– –".
GB
14
Locating a specific
track
You can quickly locate any track using the
number buttons. You can also find a specific
point in a track while playing a CD.
DISPLAY
To locate
a specific track directly
a point while listening to > (forward) or .
the sound
a point while observing
the display
Note
You cannot locate a specific track if "SHUF
REP" or "PGM" is lit in the display. Turn off the
indication by pressing x.
Tip
When you locate a track numbered over 10, press
>10 first, then the corresponding number buttons.
Example:
To play track number 23, press >10 first, then 2
and 3.
Number
buttons
., >
Press
the number button of
the track.
(backward) while
playing and hold down
until you find the point.
> (forward) or .
(backward) in pause
and hold down until
you find the point.