Using Optional Equipment; Cd/Md Changer - Sony CDX-R505X Operating Instructions Manual

The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
SETUP
Clock Adjust (page 4)
Beep
To set "on" ( ) or "off."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "Normal" ( ): to use the rotary commander in
z
the factory-set position.
– "Reverse": when you mount the rotary
commander on the right side of the steering
column.
AUX-A* 1 (AUX Audio)
To turn the AUX source display "on" (
"off" (page 13).
DSPL
(Display)
Clock (Clock Information)
To display the clock and the display items at the
same time.
– "on": to display at the same time.
– "off" ( ): to not display at the same time.
z
Dimmer
To change the brightness of the display.
– "Auto" ( ): to dim the display automatically
z
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
M.Dspl*
2 (Motion Display)
To select the Motion Display mode.
– "SA" ( ): to show moving patterns and
z
spectrum analyzer.
– "on": to show moving patterns.
– "off": to deactivate the Motion Display.
Demo*
1 (Demonstration)
To set "on" ( ) or "off."
z
A.Scroll (Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– "on": to scroll.
– "off" ( ): to not scroll.
z
P/M
(Play Mode)
Local (Local seek mode)
– "on": to only tune into stations with stronger
signals.
– "off" ( ): to tune normal reception.
z
Mono (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "on": to hear stereo broadcasts in monaural.
– "off" ( ): to hear stereo broadcast in stereo.
z
IF
– "Auto" (
reception frequency to eliminate noise.
– "Wide"*
broadcasts in stereo and with full the
frequency signal reception.
SOUND
EQ7 Tune (page 9)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "off " (
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off "
( ), "125Hz" or "78Hz."
z
Loudness
To enhance bass and treble at lower volume.
) or
– "on": to reinforce bass and treble.
z
– "off" (
AUX Level
To adjust the input level for each connected
auxiliary equipment (±6 dB). This setting
negates the need to adjust the volume level
between sources.
EDIT
Name Edit (page 10)
Name Delete (page 10)
BTM (page 8)
*1 When the unit is turned off.
*2 When the unit is turned on.
*3 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Disc number
Playback starts.
): to narrow automatically the
z
3 : to always hear FM stereo
), "78Hz" or "125Hz."
z
): to not reinforce bass and treble.
z
Unit number
continue to next page t
11