Rotary Commander Rm-X4S - Sony CDX-M8815X Operating Instructions Manual

2 Press (MODE) repeatedly until the desired
changer appears.
Disc
number
Unit number
Playback starts.
* When MDLP disc is played.
Skipping groups and discs
1 During playback, press M or m
To skip Press M or m
group and release (hold for a
moment).
group within 2 seconds of first
continuously releasing.
discs repeatedly.
discs then, press again within 2
continuously seconds and hold.
Repeat and shuffle play
1 During playback, press (1) (REP) or (2)
(SHUF) repeatedly until the desired setting
appears.
Select
REP-Disc*
1
SHUF-
Changer*
1
SHUF-All* 2
*1 When one or more CD/MD changers are
connected.
*2 When one or more CD changers, or two or more
MD changers are connected.
To return to normal play mode, select "REP-off"
or "SHUF-off."
Tip
"SHUF-All" will not shuffle tracks between CD units
and MD changers.
Locating a disc by name — LIST
You can select a disc from the list when
connecting a CD changer with the CUSTOM
FILE function or an MD changer.
If you assign a name to a disc, the name appears
on the list. For details on labeling a disc, see
page 10.
1 During playback, press (LIST).
12 The disc number and disc name will appear.
LP2/LP4
indication*
To play
disc repeatedly.
tracks in the changer in
random order.
tracks in all units in random
order.
2 Press M or m repeatedly until the desired disc
appears.
3 Press (ENTER) to play the disc.

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SO U N D
M O D E
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on the card remote commander.
SOUND
PRESET/
DISC
SOURCE
VOL
SEEK/AMS
The following controls on the rotary commander
require a different operation from the card
remote commander.
• PRESET/DISC control
To control radio/CD, the same as M or m (push
in and rotate).
• VOL (volunme) control
The same as (VOL) +/– (rotate).
• SEEK/AMS control
To control radio/CD, the same as < or ,
(rotate, or rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
D S P L
M O D E
S O U N D
ATT
MODE
DSPL
OFF
To decrease