Receiving A Station Through A List - List; Other Functions; Changing The Sound Settings; Adjusting The Sound Characteristics - Sony CDX-M8815X Operating Instructions Manual
Fm/am compact disc player
Hide thumbs
Also See for CDX-M8815X:
- Service manual (62 pages) ,
- Operating instructions manual (45 pages) ,
- Operating & installation instructions (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
Receiving a station through a list
— LIST
You can list up the frequency or the name. For
details on labeling a station, see page 10.
1
Select the band, then press (LIST).
The frequency or station name appears.
2
Press M or m repeatedly until the
desired station appears.
3
Press (ENTER) to receive the station.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader
and subwoofer volume.
1
Select a source, then press (SOUND)
repeatedly to select the desired item.
The item changes as follows:
BASS (bass) t TREBLE (treble) t
BALANCE (left-right) t
FADER (front-rear) t
SUB (subwoofer volume)*
* “ ∞” is displayed at the lowest setting, and can be
adjusted up to 20 steps.
2
Press < or , repeatedly to adjust
the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
Adjusting the equalizer curve
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press (MENU).
2
Press M or m repeatedly until “EQ7
Tune” appears, then press (ENTER).
3
Press < or , repeatedly to select the
desired equalizer type, then press
(ENTER).
4
Press < or , repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz y 157Hz y 396Hz y 1.0kHz
y 2.5kHz y 6.3kHz y 16kHz
5
Press M or m repeatedly to adjust the
desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
continue to next page t
Page 9
Advertisement
Chapters
Table of Contents
