6. Attach the Connector to the Interior Assembly.
Important Note: To prevent damage, always handle the wire harness
at the connector (do not pull wires).
a. Align the connector with the connector port of the interior assembly,
matching notch to slot.
b. Once aligned, push the connector in firmly to connect.
7. Install Interior Assembly.
a. Tucking any excess
wire back into slot of
mounting plate, place the
interior assembly on door,
aligning the spindles with
the spindle slots of interior
b. Once flush on door, insert and tighten small
screws to secure assembly onto the mounting plate.
Note: To aid insertion of
screws, approach the screw
holes with the screw loaded
onto the screwdriver.