MSI PM8M2-V Series Manual page 52

Resume By PS/2 Mouse
The setting determines whether the system will be awakened from power
saving modes when the PS/2 mouse input signal is detected. Setting options:
[Disabled], [Enabled].
Resume by PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PME (Power Manage-
ment Event). Setting options: [Disabled], [Enabled].
Modem Ring Resume
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 power off state. Setting
options: [Disabled], [Enabled].
Date/Resume Time (HH:MM:SS)
If Resume By RTC Alarm is set to [Enabled], the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields (using the <+> and <-> to select the date & time settings). Available
settings for each item are:
Date
Time (HH:MM:SS)
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.
01 ~ 31, Every Day
00 ~ 23 : 00 ~ 59 : 00 ~ 59
BIOS Setup
3-19