Operation; Light Replacement; Charcoal Filter Installation - Smeg SPUM60X User Instruction Manual

3. OPERATION:

1）Push the low button, indicated by a fan with 3 blades, and the motor will run
at a low speed. An indicator light will also illuminate. Push it again and the
motor will stop.
2）Push the medium button, indicated by a fan with 4 blades and the motor will
run at a medium speed. An indicator light will also illuminate. Push it again and
the motor will stop.
3） Push the high button, indicated by a fan with 5 blades and the motor will
run at a high speed. An indicator light will also illuminate. Push it again and the
motor will stop.
4) Push the light button; the indicating light on, and the two lighting lamps will
come on. Push it again and the lamps will turn off.

4. LIGHT REPLACEMENT

To change the light, press the lamp cup, take out the bulb counter-clockwise.
And then Insert a new lamp.

5. CHARCOAL FILTER INSTALLATION

To remove or install the charcoal filter, twist the charcoal filter in the direction
shown below:
5