Table of Contents
Advertisement
Quick Links
TABLE OF CONTENTS
1 Specifications ----------------------------------------------------- 2
2 Location of Controls and Components ------------------- 3
3 Troubleshooting Guide ----------------------------------------- 4
4 Disassembly and Assembly Instructions ---------------- 5
4.1. Dust box lid U removal ----------------------------------- 5
4.2. Separate the upper and lower body units ----------- 5
partition U---------------------------------------------------- 6
4.4. Printed Circuit Board (PCB) AU removal ------------ 7
4.5. Motor removal ---------------------------------------------- 8
5 Wiring Connection Diagram ---------------------------------- 9
6 Exploded View and Replacement Parts List -----------10
6.1. EXPLODED VIEW (ATTACHMENTS) --------------10
6.2. PARTS LIST (ATTACHMENTS) ----------------------10
6.3. EXPLODED VIEW (BODY UNIT) -------------------- 11
6.4. PARTS LIST (BODY UNIT) ----------------------------12
6.5. PACKING INSTRUCTIONS----------------------------13
6.6. PACKING LIST--------------------------------------------14
Model No.
Product Color :Metallic Blue
Destination
PAGE
© Panasonic Corporation 2009
Unauthorized copying and distribution is a violation
of law.
Order Number VCB0902001CE
Vacuum Cleaner
MC-CG695-ZA76
MC-CG695-ZC79
MC-CG695-ZC7A
MC-CG695K-ZP47
:Europe
PAGE
Advertisement
Table of Contents
Related Manuals for Panasonic MC-CG695-ZA76
Summary of Contents for Panasonic MC-CG695-ZA76
-
Page 1: Table Of Contents
6.1. EXPLODED VIEW (ATTACHMENTS) --------------10 6.2. PARTS LIST (ATTACHMENTS) ----------------------10 6.3. EXPLODED VIEW (BODY UNIT) -------------------- 11 6.4. PARTS LIST (BODY UNIT) ----------------------------12 6.5. PACKING INSTRUCTIONS----------------------------13 6.6. PACKING LIST--------------------------------------------14 © Panasonic Corporation 2009 Unauthorized copying and distribution is a violation of law. -
Page 2: Specifications
1 Specifications Model No. MC-CG695 MC-CG695K Power source AC230V~50Hz AC240V~50Hz Input power (MAX) 1300W Power control Extension wand Telescopic Floor nozzle Dimensions (W x L x H) 300×440×235 Cord length 7.0m Net weight 5.0kg Attachments (cleaning tools) Crevice nozzle/Upholstery nozzle/Dusting brush... -
Page 3: Location Of Controls And Components
2 Location of Controls and Components... -
Page 4: Troubleshooting Guide
3 Troubleshooting Guide CONDITION CHECKPOINT METHOD OF INSPECTION CAUSE / REMEDY Motor does not rotate. Power supply cord Check power supply cord continu- If there is no continuity, replace ity. Check cord reel U electrical con- cord reel U. tinuity. Fuse (250V, 10A) Check for fuse meltdown. -
Page 5: Disassembly And Assembly Instructions
4 Disassembly and Assembly Instructions Caution: 1. When disassembling, check the component fitting state and wirings. After repairing, always restore them to the original state. 2. Carefully handle the removed components, packing, etc. If they are damaged, then replace them with new ones. 3. -
Page 6: Separate The Cord Reel U And The Body Partition U
4.3. Separate the cord reel U and 3. Remove the wheel supporter right and wheel supporter left. the body partition U 1. Remove the cord reel partition from the lower body. 2. Remove the two lead wire terminals. *Pull the terminals out while holding down the termi- nal lock release. -
Page 7: Printed Circuit Board (Pcb) Au Removal
4.4. Printed Circuit Board (PCB) AU 4. Disengage the fast-on terminals of the two lead wires connecting the PCB AU. removal *Note: When disengaging the fast-on terminals, pull straight 1. Remove the control terminal U, the power control and the out without lateral movement while holding down the switch from the motor support cover U. -
Page 8: Motor Removal
4.5. Motor removal 1. Remove the motor support rubber (rear) from the motor support front. 2. Remove the two screws from the motor support front. 3. Remove the motor support front from the motor unit. 4. Remove the motor support rubber (front) from the motor unit.