Printed Circuit Board (Pcb) Au Removal - Panasonic MC-CG695-ZA76 Service Manual

4.4. Printed Circuit Board (PCB) AU
removal
1. Remove the control terminal U, the power control and the
switch from the motor support cover U.
2. Remove the four screws affixing the motor support cover
U.
3. Remove the motor support cover U and remove the PCB
AU.
4. Disengage the fast-on terminals of the two lead wires
connecting the PCB AU.
*Note:
When disengaging the fast-on terminals, pull straight
out without lateral movement while holding down the
lock release.
7