Operation
The MiniMet 1000 Grinder-Polisher can be used to prepare a wide range of specimen materials by fine
grinding, rough polishing, and by final polishing.
Control Panel
To power on the MiniMet 1000, move the power switch on the back of the machine to the ON
position and press the Power button on the control panel.
Buttons
POWER ............ Activates or deactivates power to the MiniMet 1000.
INCREASE / DECREASE Use the INCREASE or DECREASE buttons to select a range
RUN / STOP ..... Press the RUN / STOP button to activate a grinding-polishing cycle or to
MA691100_14.1
Figure 1 MiniMet 1000 Grinder-Polisher Control Panel
When ON, the panel LCDs will light up.
of values for the different parameters.
stop a grinding-polishing cycle
[Original Instructions]
5
4/08/2013