Safety Information; Machine Use And Care - Buehler MiniMet 1000 Manual

Safety Information

For safe installation and operation of this equipment, carefully read and understand the contents of this
manual. Improper operation, handling, or maintenance can result in equipment damage and personal
injury.
The MiniMet 1000 is designed for use in dry, indoor laboratory and workshop environments away from
strong electromagnetic fields and with normal temperature ranges (41° F to 104° F / 5° C to 40° C) and
non-condensing humidity ranges (30-90%).

Machine Use and Care

All operators should be trained in the use of grinder polishers. If training is needed contact
Buehler at 800.BUEHLER (800.283.4537) or your local Buehler Sales Representative.
Always use safety glasses. Flying debris and liquids can cause severe eye injury.
Dress properly. Do not wear loose clothing or jewelry and contain long hair. They can be caught
in moving parts and can result in severe personal injury. Protective equipment should be worn to
handle specimens, which may be sharp or hot.
Do not operate machine in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Sparks may ignite the dust or fumes.
Maintain the MiniMet 1000 with care. Properly maintained machines are less likely to bind and
are easier to control. Any alteration or modification is a misuse and may result in a dangerous
situation.
Only qualified repair personnel must perform machine service. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
Replace damaged or defective parts immediately and use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance instructions may create a risk of
electrical shock or injury.
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the machine operation. If damaged, have the machine serviced
before using. Poorly maintained machines cause many accidents.
Do not abuse the power cord. Never use the cord to cart the machine or pull the plug from
an outlet. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace
damage cords immediately. Damaged cords increase the risk of electrical shock.
Use of extension cords is not recommended for Buehler machines and equipment.
MA691100_14.1
2
[Original Instructions] 4/08/2013