Advertisement
Billion BIPAC-7402 / 7402W (Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Wireless (7402W Only)
WLAN Service: Default setting is set to Enable.
ESSID: Enter the unique ID given to the Access Point (AP), which is already built-in to the
router's wireless interface. To connect to this device, your wireless clients must have the
same ESSID as the device.
ESSID Broadcast:
Disable: Any client that using the "any" setting cannot discover the Access Point (AP)
in question.
Enable: Any client that using the "any" setting can discover the Access Point (AP) in
question.
Regulation Domain: There are five Regulation Domains for you to choose from, including
North America (N.America), Europe, France, etc. The Channel ID will be different based
on this setting.
Channel ID: Select the ID channel that you would like to use.
Reset: Reset the Access Point (AP), which is already built-in to the router's wireless
interface.
Connected: True or False. That it is the connection status between the system and the
build-in wireless card.
Card Type: The name of Chipset, which is already build-in to the router's wireless
interface.
AP Firmware Version: The Access Point firmware version.
Primary Firmware Version:The initial boot code firmware version in build-in wireless card.
Chapter 4: Configuration
29
Advertisement
