Precautions And Warnings - Pearl PCBC16F16S Owner's Manual

PLEASE READ BEFORE PROCEEDING WITH INSTALLATION
FAILURE TO READ AND CONSIDER SAFETY INSTRUCTIONS IN THIS MANUAL OR ON
BEST CONTROL MAY RESULT IN PERSONAL INJURY OR SERIOUS DAMAGE TO PIPING
This is the safety alert. When you see this symbol in this manual, look for one of the following
signal words and be alert to the potential for personal injury.
Warns about hazards that will cause serious personal injury, death or major property
damaged if ignored.
Warns about hazards that can cause serious personal injury, death or major property
damaged if ignored.
Hazardous pressure.
Under certain conditions, submersible pumps can develop extremely high pressure. Install a
pressure reducing valve to limit pressure to safe levels for application. Be sure well is
equipped with a pressure relief valve.
Do not allow pump, BEST CONTROL, piping, or any other system component containing water to
freeze. Freezing may damage system, leading to injury or flooding. Allowing BEST CONTROL or
system components to freeze will void warranty.
Hazardous voltage.
Can shock, burn or cause death.
Install ground and wire BEST CONTROL according to local code and National Electrical Code
requirements.
Depressurize the system and disconnect power supply before installing or servicing BEST CONTROL.
Make sure line voltage and frequency of power supply match motor nameplate voltage and frequency
and BEST CONTROL voltage and frequency.
Install BEST CONTROL according to all plumbing, pump and well code requirements.
Pipe joint compound can cause cracking in plastic. Use only Teflon tape when sealing joints in plastic pipe or
connecting pipe to thermoplastic pumps and BEST CONTROL.
For threaded conduit opening - To be used with UL Listed or Recognized, liquid-tight non-metallic (plastic)
conduit fittings.
The manufacturer is not responsible or liable for damage due to improper
installation or use
OR FIXTURES !
.
- 2 -