Before removing the electronic box ensure that power unit is off and unit is depressurized.
2) Take off the box by removing the three
screws attaching the electronic box to
the unit body.
4) Install the new electronic box and
t
ighten the three screws.
Do not overthighten or damage to
threads may result.
WARNING: Do not turn on power until the box cover has been securely fastened.
ELECTRONIC BOX REPLACEMENT
1
3
5
1) Remove the box cover and disconnect
the electrical wires.
3) Remove the electronic box.
5) Tighten the six screws on the cover of
the electronic box to ensure water tight
s eal.
If cover is not securely fastened,
RESET button will not operate.
- 14 -
2
4