Roland VR-1HD Reference Manual page 39

Menu item Value
(bold text: default value)
When ASSIGN = REVERB
SW ON
OFF,
Specifies the operation of the AUDIO EFFECTS button.
SW MODE MOMENTARY
LATCH
LEVEL -20
-INF–
TIME 5–5.0sec
0.0–0
Specifies the reverb type.
TYPE ROOM
HALL
RED, GREEN, YELLOW, BLUE,
LED COLOR
MAGENTA, CYAN
When ASSIGN = MUTE
SW OFF, ON
Specifies the operation of the AUDIO EFFECTS button.
SW MODE
MOMENTARY
LATCH
HDMI 1–3,
CH USB FROM PC, USB STREAM,
AUX, MAIN
RED, GREEN, YELLOW, BLUE,
LED COLOR
MAGENTA, CYAN
When ASSIGN = SOLO
OFF, ON
SW
Specifies the operation of the AUDIO EFFECTS button.
SW MODE MOMENTARY
LATCH
HDMI 1–3,
CH
USB FROM PC
RED, GREEN, YELLOW, BLUE,
LED COLOR
MAGENTA, CYAN
(*11) The factory settings for EFFECTS 1–4 are as follows.
Menu item EFFECTS 1
ASSIGN VOICE CHANGER
SW OFF
SW MODE LATCH
TARGET
MIC 1
PITCH +12
FORMANT +4
ROBOT OFF
MIX
100
LED COLOR MAGENTA
Explanation
Turns reverb on/off.
You can also turn this on/off using the AUDIO EFFECTS button to which the function is assigned.
The effect is on only while you hold down the button, and turns off when you release the button.
The effect alternately turns on/off each time you press the button.
Sets the amount of sound that is returned from the reverb (return level). This adjusts the depth of
0–10.0dB
the overall reverb.
Specifies the time until the reverberation is no longer heard.
Produces the natural-sounding reverberation of a room.
Produces the reverberation that is typical of a performance in a concert hall.
Specifies the illumination color of the AUDIO EFFECTS button.
Turns the mute function on/off for the audio specified by "CH. "
You can also turn this on/off using the AUDIO EFFECTS button to which the function is assigned.
The effect is on only while you hold down the button, and turns off when you release the button.
The effect alternately turns on/off each time you press the button.
MIC 1–2, LINE,
Specify the audio that will be affected by the operation.
Specifies the illumination color of the AUDIO EFFECTS button.
Turns the solo function on/off for the audio specified by "CH. "
You can also turn this on/off using the AUDIO EFFECTS button to which the function is assigned.
The effect is on only while you hold down the button, and turns off when you release the button.
The effect alternately turns on/off each time you press the button.
MIC 1–2, LINE,
Specify the audio that will be affected by the operation.
Specifies the illumination color of the AUDIO EFFECTS button.
Menu item EFFECTS 2
ASSIGN PLAYBACK (BGM/SE)
SW OFF
SW MODE LATCH
AUDIO ASSIGN
BriskAfternoon
LEVEL 0.0dB
LOOP ON
FADE IN OFF
FADE OUT
3.0sec
LED COLOR CYAN
Menu item EFFECTS 3
ASSIGN PLAYBACK (BGM/SE)
SW OFF
SW MODE LATCH
AUDIO ASSIGN
Applause
LEVEL 0.0dB
LOOP OFF
FADE IN OFF
FADE OUT
1.0sec
LED COLOR BLUE
Menu List
Menu item EFFECTS 4
ASSIGN REVERB
SW OFF
SW MODE LATCH
LEVEL
-20.0dB
TIME 0.5sec
TYPE ROOM
LED COLOR YELLOW
39