Scene Menu - Roland VR-1HD Reference Manual

SCENE Menu

Menu item Value
SCENE A–E (*4) Adjusts the screen layouts that are registered in scenes A–E.
Specifies the type of screen layout.
PinP
TYPE
SPLIT
When TYPE = PinP
BACKGROUND CH INPUT 1–3 (*5)
WINDOW CH
INPUT 1–3 (*5)
WINDOW POSITION H -100.0–100.0%
WINDOW POSITION V -100.0–100.0%
WINDOW ASPECT 1 : 1, 4 : 3, 3 : 2, 16 : 9
WINDOW SIZE 10.0–100.0%
WINDOW CROPPING H 0.0–100.0%
WINDOW CROPPING V 0.0–100.0%
VIEW POSITION H -100.0–100.0%
VIEW POSITION V -100.0–100.0%
VIEW ZOOM 100.0–1000.0%
When TYPE = SPLIT
Specifies the pattern for the split.
V.CENTER
Vertically cuts-out the center of
the video.
PATTERN
* A still image loaded into the unit cannot be made smaller. If you use "V.STRETCH" or "H.STRETCH" to show a still image, the
CENTER
0.0–100.0%
A CH (LEFT/UPPER)
INPUT 1–3 (*5)
B CH (RIGHT/LOWER)
INPUT 1–3 (*5)
A-CENTER -25.0–25.0%
B-CENTER
-25.0–25.0%
COPY Specifies settings for copying a scene.
SOURCE SCENE
DESTINATION SCENE A–B–E
COPY [EXEC]
(*4) The factory settings for SCENE A–E are as follows.
Menu item SCENE A
TYPE PinP
BACKGROUND CH INPUT 1
WINDOW CH INPUT 2
WINDOW POSITION H 28.5%
WINDOW POSITION V 28.5%
WINDOW ASPECT 16 : 9
WINDOW SIZE 30.0%
WINDOW CROPPING H 0.0%
WINDOW CROPPING V 0.0%
VIEW POSITION H 0.0%
VIEW POSITION V 0.0%
VIEW ZOOM 100.0%
(*5) The video sources assigned to INPUT 1–3 are specified by VIDEO INPUT menu 0 "INPUT 1"–"INPUT 3" 0 "INPUT SOURCE. "
Explanation
(bold text: default value)
An inset screen (a small different screen) is overlaid on the background video (picture-in-
picture).
The screen is divided into left/right or upper/lower halves, and two videos are shown.
Specifies the background video.
Specifies the inset screen video.
* A still image loaded into the unit cannot be made smaller. If the still image is shown in the
inset screen, a portion of the still image is cut out and shown, instead of making it smaller to
match the size of the inset screen.
Adjusts the horizontal display position of the inset screen.
Adjusts the vertical display position of the inset screen.
Specifies the aspect ratio of the inset screen.
Adjusts the size of the inset screen.
Adjusts the horizontal size of the inset screen.
Adjusts the vertical size of the inset screen.
Adjusts the horizontal position of the video shown in the inset screen.
Adjusts the vertical position of the video shown in the inset screen.
Adjusts the zoom of the video shown in the inset screen.
A A B A B A
A A
B B
A B A B A B
stretch effect might not apply correctly depending on the resolution of the still image or the display region of the screen.
Adjusts the position at which the screen is divided.
Specifies the video that is shown in the left or upper side.
Specifies the video that is shown in the right or lower side.
This is valid if "PATTERN" is set to "V.CENTER" or "H.CENTER. "
When using V.CENTER
Adjusts the horizontal position of the video that is shown on the left side.
When using H.CENTER
Adjusts the vertical position of the video that is shown on the upper side.
This is valid if "PATTERN" is set to "V.CENTER" or "H.CENTER. "
When using V.CENTER
Adjusts the horizontal position of the video that is shown on the right side.
When using H.CENTER
Adjusts the vertical position of the video that is shown on the lower side.
A–E Specifies the copy-source scene.
Specifies the copy-destination scene.
Executes the scene copy.
SCENE B
PinP
INPUT 1
INPUT 3
-28.5%
-28.5%
16 : 9
30.0%
0.0%
0.0%
0.0%
0.0%
100.0%
H.CENTER
Horizontally cuts-out the center
of the video.
B B A B A
A A A A A A
A A A
B B B
B B B B B B
A B A B A
Menu item SCENE C
TYPE SPLIT
PATTERN V.CENTER
CENTER 50.0%
A CH (LEFT/UPPER) INPUT 1
B CH (RIGHT/LOWER) INPUT 2
A-CENTER 0.0%
B-CENTER 0.0%
V.STRETCH H.STRETCH
Vertically shrinks the video. Horizontally shrinks the
video.
A B A A B A B A
A
A A
B
B B
B B B
B A B A B
SCENE D SCENE E
SPLIT SPLIT
H.CENTER V.CENTER
50.0% 31.6%
INPUT 1 INPUT 3
INPUT 2 INPUT 2
0.0% 0.0%
0.0% 0.0%
Menu List
A
A A
B B
B
31