Video Output Menu - Roland VR-1HD Reference Manual

Menu List

VIDEO OUTPUT Menu

Menu item
OUTPUT FORMAT
USB FORMAT
MAIN OUTPUT
STATUS
COLOR SPACE
DVI-D/HDMI
ZOOM
POSITION H
POSITION V
BRIGHTNESS
CONTRAST
SATURATION
RED
GREEN
BLUE
MONITOR (MENU) OUTPUT
STATUS
COLOR SPACE
DVI-D/HDMI
BRIGHTNESS
CONTRAST
SATURATION
RED
GREEN
BLUE
USB STREAM
STATUS
ZOOM
SCALING TYPE
MANUAL SIZE H
MANUAL SIZE V
POSITION H
POSITION V
CONNECTION RESET
(*3) The valid range of setting values depends on conditions such as the input/output format. In some cases, changing the value of a setting might not
affect the video.
30
Value
(bold text: default value)
720p
1080i
1080p
1024x768
1280x800
1366x768
1280x1024
1400x1050
1600x1200
1920x1080
1920x1200
1920x1080/29 97p (25p)
1280x720/59.94p (50p)
1280x720/29.97p (25p)
854x480/59.94p (50p)
854x480/29.97p (25p)
Adjusts the video that is output from the MAIN connector (the main output video).
—
RGB 0–255, RGB 16–235, YCC
HDMI, DVI-D
10.0–100 0–1000.0%
-1920–0–1920
-1200–0–1200
-64–0–64
-64–0–64
-64–0–64
-64–0–64
-64–0–64
-64–0–64
Adjusts the video that is output from the MONITOR (MENU) connector.
—
RGB 0–255, RGB 16–235, YCC
HDMI, DVI-D
-64–0–64
-64–0–64
-64–0–64
-64–0–64
-64–0–64
-64–0–64
Adjusts the video that is output from the USB STREAM connector.
(HIGH SPEED, SUPER SPEED)
0–1000.0%
10.0–100
Specifies the scaling type.
FULL
LETTERBOX
CROP
DOT BY DOT
-2000–0–2000 (*3)
-2000–0–2000 (*3)
-1920–0–1920
-1200–0–1200
[EXEC]
Explanation
Specifies the output format of the MAIN/MONITOR (MENU) connector.
* When you change the setting, the change is not applied until you press the [VALUE] knob
to confirm.
Specifies the output format of the USB STREAM connector. This further converts the video
that was format-converted by "OUTPUT FORMAT" into a format that can be streamed.
* The numerical value in parentheses is the frame rate when the SYSTEM menu setting
"FRAME RATE" is set to "50 Hz. "
* When you change the setting, the change is not applied until you press the [VALUE] knob
to confirm.
Indicates the connection status of the MAIN connector.
Specifies the color space (system for representing colors in video).
Specifies the type of output signal.
Adjusts the zoom ratio.
Adjusts the display position in the horizontal direction.
Adjusts the display position in the vertical direction.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the saturation.
Adjusts the red level.
Adjusts the green level.
Adjusts the blue level.
Indicates the connection status of the MONITOR (MENU) connector.
Specifies the color space (system for representing colors in video).
Specifies the type of output signal.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the saturation.
Adjusts the red level.
Adjusts the green level.
Adjusts the blue level.
Indicates whether the connection uses USB 2.0 (HIGH SPEED) or USB 3.0 (SUPER SPEED). If
not connected to a computer, this indicates "NOT CONNECTED. "
Adjusts the zoom ratio.
Always displays the picture expanded to full screen, irrespective of the aspect ratio of the
input video.
Enlarges or reduces the incoming video to a full-screen view while keeping the aspect ratio
unchanged.
Enlarges or reduces the incoming video so that the output picture has no blank margins
while keeping the aspect ratio unchanged. Video extending beyond the borders is cut off.
Performs no scaling.
Adjusts the horizontal size.
Adjusts the vertical size.
Adjusts the display position in the horizontal direction.
Adjusts the display position in the vertical direction.
Reconnects the computer and the VR-1HD when the video is garbled or when operation is
otherwise unstable.