Using Optional Equipment; Cd/Md Changer - Sony CDX-F605X Operating Instructions Manual

The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
Setup
Clock Adjust (Clock Adjust) (page 4)
Beep
To set "on" ( ) or "off."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "Normal" ( ): to use the rotary commander in
z
the factory-set position.
– "Reverse": when you mount the rotary
commander on the right side of the steering
column.
AUX-A* 1 (AUX Audio)
To turn the AUX source display "on" (
"off" (page 13).
Display
Clock (Clock Information)
To display the clock and the display items/image
at the same time.
– "on": to display at the same time.
– "off" ( ): to not display at the same time.
z
A.Image (Auto Image)
Auto Image mode automatically steps (every 10
seconds) through the display images.
– "off" ( ): to not change the image
z
automatically.
– "ALL": to step repeatedly through the display
images in all display modes.
– "SA": to step repeatedly through the display
images of Spectrum analyzer mode.
– "Movie": to step repeatedly through the
display images of Movie mode.
INFO (Display Information)
To display the items (depending on the source,
etc.) at the bottom of the display while a image
is displayed.
– "on" ( ): to display the items.
z
– "off": to not display any items.
Dimmer
To change the brightness of the display.
– "Auto" ( ): to dim the display automatically
z
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Demo* 1 (Demonstration)
To set "on" ( ) or "off."
z
A.Scroll (Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– "on": to scroll.
– "off" ( ): to not scroll.
z
Receive Mode
Local (Local seek mode)
– "on": to only tune into stations with stronger
signals.
– "off" (
Mono (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "on": to hear stereo broadcasts in monaural.
– "off" (
IF
– "Auto" (
reception frequency to eliminate noise.
– "Wide"*
broadcasts in stereo and with full the
frequency signal reception.
Sound
) or
z
EQ7 Tune (page 9)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "off," (
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off,"
( ) "125Hz" or "78Hz."
z
Loudness
To enhance bass and treble at lower volume.
– "on": to reinforce bass and treble.
– "off" (
AUX Level
To adjust the input level for each connected
auxiliary equipment (±6 dB). This setting
negates the need to adjust the volume level
between sources.
Edit
Name Edit (page 10)
Name Delete (page 10)
BTM (page 8)
*1 When the unit is turned off.
*2 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
): to tune normal reception.
z
): to hear stereo broadcast in stereo.
z
): to narrow automatically the
z
2 : to always hear FM stereo
) "78Hz" or "125Hz."
z
): to not reinforce bass and treble.
z
continue to next page t
11