Using Your Bluetooth ® Hands-Free System; Steering Wheel Control (Swc) Buttons; The Mode Button - Toyota Bluetooth SWC Owner's Manual

Using your Bluetooth
Caution: After the Bluetooth
button, it will no longer cause your audio system to switch off as shown in the
vehicle owner's manual, but will initiate a speech recognition session for the
Bluetooth

Steering Wheel Control (SWC) buttons

®
The Bluetooth hands-free system is controlled via the steering wheel control when a speech
recognition (SR) session or call is active.
The Blue led indicates the Bluetooth
Note: The button layout and design may differ from vehicle to vehicle.
Note: See "Blue led indicator functions (optional)" on page 31 for information about when and
why the buttons light or flash.

The mode button

Press and hold the mode button to initiate a speech recognition (SR) session. When you begin a
speech recognition session, you hear a prompt and then a short beep. The beep—also known as a
listening prompt—indicates that the system is waiting for a verbal command from you.
Press and hold the mode button during an speech recognition prompt, will stop the speech
recognition prompt and play the listening prompt.
®
SWC has been installed, if you press and hold the mode
®
system.
volume up
volume down
®
link state and mute state of the system (optional).
®
hands-free system
mode
arrow up
arrow down
Using your Bluetooth
®
hands-free system 7