Frymaster kfc-1 sms cooking computer user guide (42 pages)
Summary of Contents for Frymaster UHC-P
Page 1
Frymaster, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified Technicians. *8196790* Price: $6.00 24-Hour Service Hotline 1-800-551-8633 Email: service@frymaster.com 819-6790 SEPT 13...
Page 2
THE UHC-P IS NOT SUITABLE FOR OUTDOOR USE. WHEN OPERATING THIS UNIT, IT MUST BE PLACED ON A HORIZONTAL SURFACE. THE UHC-P IS NOT SUITABLE FOR INSTALLATION IN AN AREA WHERE A WATER JET CAN BE USED. THIS APPLIANCE MUST NOT BE CLEANED WITH A WATER JET.
UHC-P Table of Contents Chapter Page Warranty/Software/Hardware Availability Before You Start Getting Started: Choosing Cabinet Size, Language Software Interface Annotation Building Menus Configuring Cabinets Entering/Editing Products Transferring Data to the Cabinet Saving Cabinet Configurations Communication Troubleshooting...
Page 4
Please note, the mini computer, the UHC-P software and the IR dongle are all specially configured by Frymaster for communication with the UHC-P cabinet. The computer and the dongle ARE NOT available from their original manufactures or other suppliers configured for the cabinet. Replacements must be ordered from Frymaster.
Only bring the computer into the kitchen when ready to update the cabinets. • Cabinets should be labeled — UHC1, UHC2 — to ensure the menus/configurations and cabinets are properly matched when updating UHC-P’s.
F for Fahrenheit, C for Celsius. operating systems. On earlier operating 4 Serial Port:* Com port selection; handled by systems, the UHC-P icon is visible on the software. Communication troubleshooting covered desktop. Double-click the icon to start the in Chapter 9.
Page 7
UHC-P 3 Software Interface Introduction A number of screens are used to navigate the UHC-P software. The features of the software are annotated below: Setup Screen Feature Image 1View: Click here to view: • Cabinet, where cabinet is configured for language, size, temperature range.
Page 8
UHC-P 5 Copy: 1 Highlight an item in the Food Library. 2 Click on Copy. 3 It moves to the displayed menu. 6 Menu: View items in the menu for use on a cabinet configuration. 7 Edit: Use to edit the holding parameters for an existing product or to establish the parameters for a new product.
Page 9
UHC-P Cabinet Configuration Feature Explanation 1: Language Select language for software graphics and menu. 2: Size Set size of cabinet, two, three slots or narrow. 3: Units Set temperature scale displayed, Celsius or Fahrenheit. 4: Serial port* Establishes the computer port being used by the IR device.
UHC-P 4 Building Menus The cabinet has four menu configurations, which are assembled from food items created and stored in the software’s food library. Below is a view of the cabinet’s setup screen. Items are created and stored in the food library and moved, as necessary, to the menu column where they will be available to populate row positions on the cabinet as it is configured.
Page 11
UHC-P 4.1 Editing, Renaming, Adding Menus The software ships with four menu: BFK1, LCH1, BFK2 and LCH2. A fifth can be added. Existing ones can be deleted and new ones introduced. Five is the maximum number of menus. Follow the instructions below to add an additional menu.
Page 12
UHC-P 5 Configuring the Cabinet The software allows the configuration of up to five menus. It ships with four: BFK1, LCH1, BFK2 and LCH2. Each item is selected separately for each menu configuration. The process starts with the selection of the cabinet menu to configure.
Page 13
UHC-P 6 Entering a New Product, Deleting or Editing an Existing Product Items can be added to the Food Library and then moved to the relevant menus. NOTE: New items must have a holding temperature shared by other products. In the setup window, click on the Add button (see arrow) below the Food Library window. Scroll to find the item named New Item in the Food Library and click on it, which highlights the item. Click the Edit button. To move a newly added item to a menu for use in the cabinet follow these instructions: 1: In the Setup view, choose the menu you ...
UHC-P 7 Transferring Data to Cabinet Cabinet configurations built in the software are transferred to the cabinet with the external IR device. Hold the IR device in front of the cabinet lens (dark circle at right on the front). In the chosen cabinet view, hit the transfer button...
UHC-P 8 Saving Cabinet Configurations Cabinet configurations, in groups — like BKF1, BKF2, LCH1 and LCH2 — can be named and saved in the software. These saved cabinet configurations can be reacquired later for transferring to the cabinet. Follow the directions below. Five is the maximum number of menus that can be saved in a cabinet configuration.
Page 16
UHC-P Loading Saved Cabinets Follow the directions below to acquire and load saved cabinet configurations. In a cabinet view, click on the Saved Cabinet radio button. In the Saved Cabinet dialog box, highlight the desired cabinet and click Open. The...
UHC-P 9 Communication Troubleshooting If the UHC-P software doesn’t recognize the IR dongle upon startup, it may be necessary to select the com port being used to communicate with the cabinet. Follow the directions below to select the com port after attaching the IR dongle.
Shipping Address: 8700 Line Avenue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-318-219-7140 FAX (Tech Support) 1-318-219-7135 Price: $6.00 SERVICE HOTLINE 819-6790 PRINTED IN THE UNITED STATES 1-800-551-8633 SEPT 13...
Need help?
Do you have a question about the UHC-P and is the answer not in the manual?
Questions and answers