Other Functions; Using The Rotary Commander - Sony CDX-C780 Primary Operating Instructions Manual

Other Functions

You can connect an optional rotary
commander (RM-X4S) with this unit.
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control an optional CD or MD unit
with the rotary commander.
By pressing buttons (the SOURCE
and MODE buttons)
EN
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
TUNER n CD n MD n TV*
* When an optional TV tuner or Video is
connected.
Pressing (MODE) changes the operation
in the following ways;
• Tuner: FM1 n FM2 n AM
• CD unit: CD1 n CD2 n ...
• MD unit: MD1 n MD2 n ...
• TV/Video: TV n Video1 n Video2 n ...
Tip
When the POWER SELECT switch is set to position
B, you can turn on this unit by pressing (SOURCE)
on the rotary commander.
16
By rotating the control (the SEEK/
AMS control)
By pushing in and rotating the
control (the PRESET/DISC control)
(MODE)
Other operations
Rotate the VOL control to
adjust the volume.
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to tune in a specific
station.
Push in and rotate the control to:
•Receive the stations memorized on the
number buttons.
•Change the disc.
Press (ATT) to
attenuate the sound.
Press (OFF) to turn
off the unit.