Storing The Station Names; Station Memo - Sony CDX-C780 Primary Operating Instructions Manual

If you cannot tune in a preset
station
Push the SEEK/AMS control up or down
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT), then press (4) (PLAY MODE) repeatedly
until "Local" (local seek mode) is displayed. Then
press (5) (n) to select "Local on." Press (SHIFT).
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to push the SEEK/AMS control up or down
and hold until the desired frequency appears
(manual tuning).
If FM stereo reception is poor
EN
— Monaural Mode
1
Press (SHIFT), then press (4) (PLAY
MODE) repeatedly until "Mono" appears.
2
Press (5) (n) repeatedly until "Mono
on" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (SHIFT).
To go back to normal mode, select "Mono off"
in step 2 above.
14
If interference occurs during FM
reception
If there is interference from neighboring
stations, follow the steps below and select
"Narrow". If interference is not a problem,
select "Wide" to maximize signal reception
and improve sound quality or "IF Auto "to
switch between "Narrow" and "Wide"
automatically.
1
Press (SHIFT) during FM reception.
2
Press (4) (PLAY MODE) repeatedly until
"IF Auto" appears.
3
Press (5) (n) repeatedly to select
desired setting
z IF Auto
Narrow Z
4
Press (SHIFT).
Changing the displayed items
Each time you press (DSPL), the item changes
as follows:
z Frequency
MOTION DISPLAY* Z
* All the items above are scrolled in the display
one by one in order.

Storing the station names

—Station Memo

You can assign a name to each radio station
and store it in memory. The name of the
current station appears in the display. You can
store up to eight characters for each station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press (LIST) for two seconds.
z Wide
z Clock