Servicing; Transport On Highways; Safety Symbols - UNIA HARRIER Operating And Maintenance Manual

Chisel pilough
Table of Contents

Advertisement

1.3 Servicing

Always protect the machine with appropriate supports when performing any maintenance
or repair work on the machine lifted up.

1.4 Transport on highways

curves (the unit is pivotally connected to the tractor)!
The machine, as the part of the vehicle that protrudes outside the rear side outline of the
tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic.
When transporting the machine on highways, always use warning lights, distinguishing plate
and side reflectors.
Maximum width of the machine, which can be moved on highways is specified in the
detailed regulations of the country of use. They should be observed.

1.5 Safety Symbols

A
B
C
D
E
OPERATING AND MAINTENANCE MANUAL HARRIER
Service the machine when it is lowered onto the ground! If the machine is
coupled with the tractor, engine of the tractor must be off and brakes on!
Use only tools in good technical condition and genuine materials and spare
parts for servicing.
Never exceed the speed limits allowed on highways and follow traffic
regulations of the respective country!
Pay special attention when passing and overtaking other vehicles and on
Read through the Operating Manual thoroughly before operating the
machine
Stop the tractor engine and take away the ignition key before any
servicing and repair work
Keep safe distance off the machine
Never reach into the crushing area as long as the components can
move
Stay away of the machine tilting area
- 7 -

Advertisement

Table of Contents
loading

Table of Contents